Home Page
  Product Description
  How It Works
  Downloads
  Research & Development
  Contact Us / Ordering
You are visitor no.
695
How It Works

 

STAGE 1

Position bracket on concrete in approx correct location.

   

STAGE 2

Drill concrete for anchor.

   

STAGE 3

If drill hits re-bar move over and re-drill without moving bracket.

 
 
   

STAGE 4

Install anchor, alignment washer and back-up washer. Pack to get correct height.

   

STAGE 5

Move bracket until it is in exactly the correct position. Rotate alignment washer to cover oversize hole. Tighten anchor to hold bracket temporarily.

   

STAGE 6

Repeat stages 1 to 5 for all adjacent brackets.

 
   

STAGE 7

Once everything is in exactly the right position, inject with approved resin to lock off the bracket permanently.

   
Copyright © 2004 Site Developed by Mysterious Ways